Optimal Sizing of Distributed Generation in Gas/electricity/heat Supply Networks

Optimal Sizing of Distributed Generation in Gas/electricity/heat Supply Networks
By:
Published on 2018 by

Abstract: Multi-energy supply systems are expected to play an important role in smart grids. Today's energy supply systems are large nodes networks, and different types of energy are needed at each node to satisfy the different energy demands. These different types of energy can then be converted to each other through specific devices. How to decide the ratings of these devices at each node to make the system cost-effective is addressed in this paper. The focus is set on a gas/electricity/heat hybrid network. A hydrogen storage system (fuel cell, electrolyzer, and tanks) is used as electricity storage system, a combined heat and power device is used to produce heat and electric power, etc. A mixed integer linear programming algorithm is used to determine the optimal operation schedule of the system, where the goal is to minimize shed load. A genetic algorithm is also used to search for the best size of each component, where the goal is to minimize the total investment costs. In order to resist to contingency events, betweenness centrality (describing the relative importance of each node) is then used to find the worst case under contingency events. This worst case scenario is used to research about the influence of contingencies on the sizing results. At last, two cases (modified 13-node network and IEEE 30+Gas 20+Heat 14 nodes system) are tested using the proposed sizing method. The results show that the renewable energy location, investment cost of components, and the structure of the whole system influence the sizing results. When the installed capacity of photovoltaic panels is reduced by 50%, the capacity of the electrolyzer decreases by 3%, the capacity for the hydrogen tanks increases by 2%; when the investment cost of the fuel cell and electrolyzer decreases by 50%, the capacity of photovoltaic increases by 14%, the electrolyzer increases by 13%, and hydrogen tanks increase by 2%. After considering the worst case contingency event, for case I, the capacity of photovoltaic and fuel cell increase by 12% and 11%, and the electrolyzer increases by 34%; for case II, the capacity of photovoltaic and fuel cell increase by 8% and 11%, and the electrolyzer increases by 57%. Highlights: A multi-node gas/electricity/heat network model is presented. Combined genetic algorithm and mixed integer linear programming. Betweenness centrality is used to describe the relative node importance. Research about the influence of contingencies on the sizing results.

This Book was ranked at 36 by Google Books for keyword Gas/Electricity.

Book ID of Optimal Sizing of Distributed Generation in Gas/electricity/heat Supply Networks's Books is YmPzvQEACAAJ, Book which was written by have ETAG "H+5PeO+hmIU"

Book which was published by since 2018 have ISBNs, ISBN 13 Code is and ISBN 10 Code is

Reading Mode in Text Status is false and Reading Mode in Image Status is false

Book which have " Pages" is Printed at BOOK under Category

This Book was rated by Raters and have average rate at ""

This eBook Maturity (Adult Book) status is NOT_MATURE

Book was written in en

eBook Version Availability Status at PDF is falseand in ePub is false

Book Preview

Related Posts:

0 Response to "Optimal Sizing of Distributed Generation in Gas/electricity/heat Supply Networks"

Post a Comment